Dallas Heating and AC

xIf you search around the internet concerning tips to maximize the life of your central heating and air-con systems and improve the general air quality in your home, most sites will echo the recommendation that you ought to have your ductwork cleaned each 3-4 years. All the reasons that they site for needing to scrub your ducts are valid, but the most dominant of the reasons is that the ducts are a breeding ground for dust mites and mildew. The frequency of each 3-4 years is also reliant on the potency of the air filters used on your system and the amount of humidity that flows thru the system.

Rather than use the 3-4 year rule, you can perform this very simple check to see if you ducts are contaminated. This check should be done yearly between seasons when the system is not running. Remove a register from the vent outlet and check the inside surface of the register. If all that you see is a thin layer of dust that washes off simply, then your channels are in relatively good shape. However if you have a blackish coating that requires some cleaning to get the inside surface of the register clean, then you are most likely dealing with mold and you may be certain that the outside of your ducts are covered with the same throughout . So, what do you do if your channels are contaminated? There are a number of well established corporations out there that concentrate on cleaning your channels, but our advice is to have them replaced and here is why.

- Even the best cleaning system in the world will leave some behind to again multiply and spread through your system.
- mould and other contaminants that acquire in your ductwork will make the usually pliable surface of the ducts fragile which can cause cracking and subsequently leaks in your system.
- channel cleaning gear can doubtless puncture your ducts so causing leaks in your system.

By replacing your channels, you'll get the following benefits that you won't get by cleaning them :

- Your ducts will be 100% contaminant-free guaranteed.
- Improved channel material with better insulation may be employed to enhance the overall potency of your system.
- New channel seals will be installed. Failed duct seals are a first reason for system inefficiency over time for installations that have never had their channels replaced.

If you have not had your channels checked, cleaned, or replaced, then we highly recommend that you perform the easy checks outlined above. In particular, if you're living in a home over 20-years old that still has the original ductwork, then you will be impressed with the new materials available that will not only give you a cleaner living environment, but will also improve the potency of your system.

Comments are closed.